Lumasense-technologies M8100SM-EXP Uživatelský manuál stáhnout pdf (Strana 25)

T QUASAR Flare Monitors Operation Manual Electrical Installation  25

4.2.4 Powering with 115 Volts AC



Note: Voltage/fusing are factory set. Use a wire gauge appropriate to service

installation. See Appendix A for Power and Fuse Requirements and Appendix E

Engineering Drawing 613-816, Service Connections.

To connect 115 VAC to Terminal TB1:

 AC Hot to terminal labeled L1/HOT

 AC Neutral to terminal labeled N/NEUT

 AC Ground to Safety Ground stud.

4.2.5 Powering with 220/230 Volts AC



Note: Voltage/fusing are factory set. Use a wire gauge appropriate to service

installation. See Appendix A for Power and Fuse Requirements and Appendix E

Engineering Drawing 613-816, Service Connections.

North American Connection, as follows to TB1:

 AC Hot1 to terminal labeled L1/HOT

 AC Hot2 to terminal labeled N/NEUT

 AC Ground to Safety Ground stud

European Connection, as follows to TB1:

 AC L1 to terminal labeled L1/HOT

 AC N to terminal labeled N/NEUT

 AC Ground to Safety Ground stud

4.2.6 Powering with 24 Volts DC

Note: Voltage/fusing are factory set. Use a wire gauge appropriate to service

installation. See Appendix A for Power and Fuse Requirements and Appendix E

Engineering Drawing 613-816, Service Connections.

To connect 24VDC to Terminal TB1:

 +24Vdc to terminal labeled 24VDC

 24V Return to terminal labeled RTN

 Ground to Safety Ground stud

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 77 78

Žádné komentáře

Lumasense-technologies M8100SM-EXP Uživatelský manuál Strana 25